Matthews Studio Equipment представила систему креплений T-Go для экстремальных съемок

Matthews Studio Equipment has unveiled T-Go Mounting Solutions, designed to hold camera gear fast in high action and extreme environments. The line is made up of the T-Go Ball Head and T-Go 5/8” Kits, developed over decades by veteran Key Grip TJ Beatty. They are built to handle speed, sudden directional changes, vibration and extreme impact loads. “When you’re rigging on a process trailer at speed or mounting to an aircraft, you must know the camera isn’t going anywhere,” says Beatty. “I built T-Go because I needed it, and it didn’t exist.” The T-Go Ball Head Kit is a 3-in-1 camera mounting system with a Ball Head Assembly, Jr Pin Bracket, and Grid Clamp set up. Each enable rigging configurations on a Combo Stand, 5/8″ rail, or other grip equipment. The T-Go 5/8” Kit is built around the industry-standard 5/8” pin system. It provides grips with a set of crosses, swivel tees, corners, double barrels and rods in six lengths. Four included low-profile T-Go Corners each provide three pass-throughs to accept any length 5/8″ rods. The Double Barrel offers two parallel pass-throughs for inline configurations, while the T-Go Cross features orthogonally oriented pass-throughs for building out in multiple directions simultaneously. All components of the T-Go Ball Head and 5/8″ Kits are CNC-machined and finished with a hard grey anodise for wear resistance and corrosion protection.